In this article, we will discuss some intermediate, and advanced crease theory. This was a demo dent done for a recent trainee on a hood made with a sharp tap down. A lot of pressure was exerted on the tap down by the trainee in an uneven manner, so there are deeper areas of damage within the crease to make it even more difficult. This is a typical example of a severe crease that is commonly made by a kids bicycle running into a side panel from an angle. See # Fig 1 & 2
Here is a view with overhead lighting to give an idea of the relative size and depth of this crease. See # 2
Pic #3 is a view of the crease with the mini light right over the crease to show the deeper areas within the dent. In many cases this would be close to the proper....
To view this article in it's entirety, you must subscibe to the ppv section.