Repaired by Zel
Time to repair 2 hours
This is a push to paint dent I did for a body shop.
In the center of this dent, the paint is damaged. There is a vertical gouge right to the metal. This was the deepest part of the dent and the very center was stretched. The first thing I did was remove the trunk trim and license plate bracket. This turned out not to be too much in the way, but I wasn’t sure until I removed it.
I made some test pushes with an A-1 bullet tip rod on the center, where it was stretched. Nothing was really moving, and I could see I was only going to make tool marks, so I backed off. I then tried ....
To view this article in it's entirety, you must subscibe to the ppv section.