Jump to content


Photo

Repairing Dents in Plastic Bumpers


No replies to this topic

#1 Poppadent

Poppadent

    Advanced Member

  • Members
  • PipPipPip
  • 2,506 posts

Posted 18 February 2007 - 01:13 PM

The most effective way I've found to remove the dents in the plastic bumpers is a three step process...

First, I use a curing lamp (that mobile painters use) to heat the damage and surrounding area. The heat from the lamp softens a large enough area for pushing the bulk of the damage out. When you heat a larger area, it allows more of the pressure and crowning to dissipate as it softens the plastic. With the larger surface area heated and pliable, there is less pressure required to move large or deep damage. Before you push....


To view this article in it's entirety, you must subscibe to the ppv section.
  • sergey likes this



Reply to this topic